Passive SpeakerBluetooth Speaker Email:service@zeshuispeakers.com Address: ShenZhen,China
ZeShui

Zeshui is a speaker production company with more than 20 years of research and development experience. The company’s products include mature wooden speakers and wooden headphones. At the same time, the company’s research and development capabilities are very strong, and you can DIY the wooden speakers and wooden headphones you want.

Your present position: Home > News > Industry Information

How to maintain Bluetooth speakers

Release time: 2021-09-17    Viewers: 33

In addition to the quality of the speaker itself, we know that if the speaker is well maintained, the Bluetooth speaker can be used for a long time, so how to maintain the Bluetooth speaker?

1. The normal working temperature of speaker equipment should be 18℃~45℃. Too low a temperature will reduce the sensitivity of some machines (such as electronic tube machines); too high a temperature will easily burn out the components, or make the components prematurely aging. Special attention should be paid to cooling down and maintaining air circulation in summer.

2. Avoid direct sunlight to the speaker equipment, and avoid close to heat sources, such as heaters.

3. After the speaker equipment is used up, the function keys should be reset. If the function key is not reset for a long time, the tension button spring is in a stressed state for a long time, and it is easy to cause malfunction.


How to maintain Bluetooth speakers


4. Before switching on and off the power of the speaker, turn the volume potentiometer of the power amplifier to the minimum. This is the most effective protection method for the power amplifier and speakers. At this time, the power amplification of the power amplifier is almost zero, and at least it will not cause harm to the speakers during misoperation.

5. Power on regularly. When it is not used for a long time, especially in humid and high temperature seasons, it is best to power on for half an hour a day. In this way, the heat generated by the internal components of the machine can be used to drive away moisture and prevent internal coils, speaker voice coils, transformers, etc. from being damp and moldy.


How to maintain Bluetooth speakers


6. Wipe the surface of the machine with a clean, damp, soft cotton cloth at regular intervals; when not in use, cover the machine with a dust cover or cloth to prevent dust from entering.
Passive Speaker:Bluetooth Speaker

Previous :How to buy card speakers

Next :Cold knowledge of the portable bluetooth speaker industry

Back to list
Related Articles To View More
Product
Speakers Headphones
About Us
Company Profile Honor Company Philosophy Application
News Center
Company News Industry Information
R&D
R&D strength Technological innovation Smart manufacturing
Contact Us

ShenZhen, GuangDong Province, China

+86 13530005572

service@zeshuispeakers.com

©2021 zeshui. All rights reserved

service@zeshuispeakers.com +86 13530005572
Fill in the Message
Verification code